LM2575T-3.3 Texas Instruments IC REG BUCK 3.3V 1A TO220-5 Original wholesale

Categories:Integrated Circuits (ICs)
PMIC - Voltage Regulators - DC DC Switching Regulators
Manufacturer:Texas Instruments
Series:SIMPLE SWITCHER®
Packaging:Tube

Part Status:Obsolete
Function:Step-Down
Output Configuration:Positive
Topology:Buck
Output Type:Fixed
Number of Outputs:1
Voltage - Input (Min):4V
Voltage - Input (Max):40V
Voltage - Output (Min/Fixed):3.3V
Voltage - Output (Max)-
Current - Output:1A
Frequency - Switching:52kHz
Synchronous Rectifier:No
Operating Temperature:-40°C ~ 125°C (TJ)
Mounting Type:Through Hole
Package / Case:TO-220-5
Supplier Device Package:TO-220-5

Base Part Number:LM2575

FEATURES
DESCRIPTION 23 The LM2575 series of regulators are monolithic • 3.3V, 5V, 12V, 15V, and Adjustable Output integrated circuits that provide all the active functions Versions for a step-down (buck) switching regulator, capable of • Adjustable Version Output Voltage Range, driving a 1A load with excellent line and load – 1.23V to 37V (57V for HV Version) ±4% regulation. These devices are available in fixed output Max Over voltages of 3.3V, 5V, 12V, 15V, and an adjustable output version. – Line and Load Conditions • Specified 1A Output Current Requiring a minimum number of external components, these regulators are simple to use and • Wide Input Voltage Range, 40V up to 60V for include internal frequency compensation and a fixed- HV Version frequency oscillator. • Requires Only 4 External Components The LM2575 series offers a high-efficiency • 52 kHz Fixed Frequency Internal Oscillator replacement for popular three-terminal linear • TTL Shutdown Capability, Low Power Standby regulators. It substantially reduces the size of the Mode heat sink, and in many cases no heat sink is required. • High Efficiency • Uses Readily Available Standard Inductors A standard series of inductors optimized for use with the LM2575 are available from several different • Thermal Shutdown and Current Limit manufacturers. This feature greatly simplifies the Protection design of switch-mode power supplies. • P + Product Enhancement Tested Other features include a specified ±4% tolerance on output voltage within specified input voltages and APPLICATIONS output load conditions, and ±10% on the oscillator • Simple High-Efficiency Step-Down (Buck) frequency. External shutdown is included, featuring Regulator 50 μA (typical) standby current. The output switch includes cycle-by-cycle current limiting, as well as • Efficient Pre-Regulator for Linear Regulators thermal shutdown for full protection under fault • On-Card Switching Regulators conditions. • Positive to Negative Converter (Buck-Boost)

评论

发表评论

此博客中的热门博文

Texas Instruments LM3940IMPX-3.3/NOPB 1 Output 3.3V 1A SOT-223-4

Categories Integrated Circuits (ICs) PMIC - Voltage Regulators - Linear Manufacturer Texas Instruments Series- Packaging Digi-Reel® Part Status Active Output ConfigurationPositive Output Type Fixed Number of Regulators 1 Voltage - Input (Max) 7.5V Voltage - Output (Min/Fixed) 3.3V Voltage - Output (Max)- Voltage Dropout (Max) 0.2V @ 100mA Current - Output 1A PSRR- Control Features- Protection Features Over Temperature, Short Circuit Operating Temperature-40°C ~ 125°C Mounting Type Surface Mount Package / Case TO-261-4, TO-261AA Supplier Device PackageS OT-223-4 Base Part Number LM3940 For best overall performance, place all the circuit components on the same side of the circuit board and as near as practical to the respective LDO pin connections. Place ground return connections to the input and output capacitor, and to the LDO ground pin as close to each other as possible, connected by a wide, component-side, copper surface. The use of ...
阅读全文

LM1875T Texas Instruments IC AMP AUDIO PWR 30W AB TO220-5

Categories Integrated Circuits (ICs) Linear - Amplifiers - Audio Manufacturer Texas Instruments Series- Packaging Tube Part Status Active Type Class AB Output Type 1-Channel (Mono) Max Output Power x Channels @ Load 25W x 1 @ 8 Ohm Voltage - Supply 16 V ~ 60 V, ±8 V ~ 30 V Features Short-Circuit and Thermal Protection Mounting Type Through Hole Operating Temperature 0°C ~ 70°C (TA) Supplier Device Package TO-220-5 Package / Case TO-220-5 Formed Leads Base Part Number LM1875 The LM1875 has a sophisticated thermal protection scheme to prevent long-term thermal stress to the device. When the temperature on the die reaches 170°C, the LM1875 shuts down. It starts operating again when the die temperature drops to about 145°C, but if the temperature again begins to rise, shutdown will occur at only 150°C. Therefore, the device is allowed to heat up to a relatively high temperature if the fault condition is temporary, but a sustained fault will limit the m...
阅读全文

Texas Instruments LM1875T/LF02 IC AMP AUD PWR 20W MONO TO220-5

Design Resources Development Tool Selector Featured Product Create your power design now with TI’s WEBENCH® Designer PCN Assembly/Origin Mult Devices 21/Aug/2017 Online Catalog Class AB Amplifier Categories Integrated Circuits (ICs) Linear - Amplifiers - Audio Manufacturer Texas Instruments Series- Packaging Tube Part Status Active Type Class AB Output Type 1-Channel (Mono) Max Output Power x Channels @ Load 25W x 1 @ 8 Ohm Voltage - Supply 16 V ~ 60 V, ±8 V ~ 30 V Features Short-Circuit and Thermal Protection Mounting Type Through Hole Operating Temperature 0°C ~ 70°C (TA) Supplier Device Package TO-220-5 Package / Case TO-220-5 Formed Leads Base Part Number LM1875 The LM1875 has a sophisticated thermal protection scheme to prevent long-term thermal stress to the device. When the temperature on the die reaches 170°C, the LM1875 shuts down. It starts operating again when the die temperature drops to about 145°C, but if the temperature aga...
阅读全文