LM1875T/LF03 Texas Instruments Amplifier IC 1-Channel (Mono) Class AB TO-220-5
Manufacturer Texas Instruments
Manufacturer Part Number LM1875T/LF03
Description IC AMP AUD PWR 20W MONO TO220-5
Manufacturer Standard Lead Time 8 Weeks
Detailed Description Amplifier IC 1-Channel (Mono) Class AB TO-220-5
Categories Integrated Circuits (ICs)
Linear - Amplifiers - Audio
Manufacturer Texas Instruments
Series-
Packaging Tube
Part Status Active
Type Class AB
Output Type 1-Channel (Mono)
Max Output Power x Channels @ Load 25W x 1 @ 8 Ohm
Voltage - Supply 16 V ~ 60 V, ±8 V ~ 30 V
Features Short-Circuit and Thermal Protection
Mounting Type Through Hole
Operating Temperature 0°C ~ 70°C (TA)
Supplier Device Package TO-220-5
Package / Case TO-220-5 Formed Leads
Base Part Number LM1875
The preceding suggestions regarding circuit board grounding techniques will also help to prevent excessive distortion levels in audio applications. For low THD, it is also necessary to keep the power supply traces and wires separated from the traces and wires connected to the inputs of the LM1875. This prevents the power supply currents, which are large and nonlinear, from inductively coupling to the LM1875 inputs. Power supply wires should be twisted together and separated from the circuit board. Where these wires are soldered to the board, they should be perpendicular to the plane of the board at least to a distance of a couple of inches. With a proper physical layout, THD levels at 20 kHz with 10W output to an 8Ω load should be less than 0.05%, and less than 0.02% at 1 kHz.
Manufacturer Part Number LM1875T/LF03
Description IC AMP AUD PWR 20W MONO TO220-5
Manufacturer Standard Lead Time 8 Weeks
Detailed Description Amplifier IC 1-Channel (Mono) Class AB TO-220-5
Categories Integrated Circuits (ICs)
Linear - Amplifiers - Audio
Manufacturer Texas Instruments
Series-
Packaging Tube
Part Status Active
Type Class AB
Output Type 1-Channel (Mono)
Max Output Power x Channels @ Load 25W x 1 @ 8 Ohm
Voltage - Supply 16 V ~ 60 V, ±8 V ~ 30 V
Features Short-Circuit and Thermal Protection
Mounting Type Through Hole
Operating Temperature 0°C ~ 70°C (TA)
Supplier Device Package TO-220-5
Package / Case TO-220-5 Formed Leads
Base Part Number LM1875
The preceding suggestions regarding circuit board grounding techniques will also help to prevent excessive distortion levels in audio applications. For low THD, it is also necessary to keep the power supply traces and wires separated from the traces and wires connected to the inputs of the LM1875. This prevents the power supply currents, which are large and nonlinear, from inductively coupling to the LM1875 inputs. Power supply wires should be twisted together and separated from the circuit board. Where these wires are soldered to the board, they should be perpendicular to the plane of the board at least to a distance of a couple of inches. With a proper physical layout, THD levels at 20 kHz with 10W output to an 8Ω load should be less than 0.05%, and less than 0.02% at 1 kHz.
评论
发表评论